TPO Installation Cost in Brooklyn, NY
TPO installation cost is set per roof, not per catalog, and BST Roofers gives you the exact number in a free written estimate after we look at your roof. Size, tear-off, insulation, membrane thickness and how the membrane is attached are what move it. Ready to see yours?
How A TPO Roof Bill Is Built
Old layers removed
Tear-off labor grows with every layer we take off.
Insulation
Flat or tapered boards change the material and the drainage.
The membrane
Thickness and roof area set the largest share of the bill.
Heat-welded seams
More seams and corners mean more welding time.
Flashing
Walls, curbs and edges each need their own detail.
Disposal and permits
Debris hauling and permit work are counted last.
Membrane Thickness And How It Is Attached
| Membrane | What it suits | How it changes the price |
|---|---|---|
| 45mil | Lighter-duty roofs with little foot traffic. | Lowest material cost. |
| 60mil | The common choice for most flat roofs. Common | A moderate step up. |
| 80mil | Busy roofs and long-term ownership. | Highest material cost, longest wear. |
Attachment matters too: fully adhered, mechanically attached or ballasted, and each takes different labor.
Fully adhered- Mechanically attached
- Ballasted
A white reflective TPO roof can also lower cooling costs, which is part of its value. If you are weighing it against rubber, see how TPO compares with EPDM on cost and seams.
Tear-Off Or Overlay: Where The Bill Changes
A full tear-off costs more in labor and disposal, but it lets us inspect the deck and remove anything wet. An overlay puts a new TPO membrane over sound existing layers, which saves time and debris.
The layer count and any wet insulation decide which one applies. We check both during the inspection. To see the whole job, read what a full TPO replacement involves.
What Your Roof Adds To The Price
- AccessA roof reached by a tall ladder or a narrow stairwell takes longer to load and clear.
- HeightTaller buildings raise material-handling time.
- DetailsParapets, drains, ponding areas, penetrations and project timing each add or remove work.
We are licensed and insured, and we look at these before we quote. Here is what the roof inspection checks before pricing.
Brooklyn Roofs We Quote
Every quote starts from an inspection of your roof, never a formula.
Residential
- Brownstones
- Row houses
- Townhouses
Multi-family
- Apartment buildings
- Walk-up buildings
- Mixed-use buildings
Commercial
- Retail stores and offices
- Warehouses
- Restaurants
Why is there no set price per square foot?
Because roofs differ too much for one rate to be honest. Size, layers, insulation, drainage and access all change the work, so we price after we see the roof.
Is the estimate free?
Yes, the estimate is free and in writing. If you would rather spread the cost out, see spreading the cost into monthly payments.
Does thicker membrane cost more?
Yes. An 80 mil membrane costs more than 45 or 60 mil, and it typically lasts longer under wear.
Is tear-off always needed?
No. An overlay works when the existing layers are sound and dry. An inspection tells us which one your roof needs.
How long does a TPO roof last?
A well-installed TPO roof lasts for many years, and we tell you what to expect for your roof and membrane when we inspect it.
Price Your TPO Roof
Want a real number for your roof instead of a guess?